Description
TWYLYT Nightfall Activated devices effortlessly automate the task of switching ON lighting fixtures at dusk and turning them OFF at dawn, thereby saving on unnecessary power consumption with no manual intervention. They are designed prioritizing not only ease-of-use in eliminating an additional chore but also the urgent need to conserve energy.
Holding a unique advantage over other existing timer systems, the TWYLYT systems sensitivity to ambient light, other than daylight is very, very low as they only operate on ambient light conditions.
In fact TWYLYT Nightfall Activated Switches are only very slightly susceptible to incandescent filament lamps. The existing timer systems are not only highly priced but also have a disadvantage of switching ON irrespective of varying seasonal sunset timings conditions and operating only according to the time set.
Though being a Made in India product our devices are easy-on-the-pocket in comparison to the current timing systems in the market by less than half the price.
Applications
TWYLYT Night Fall Activated devices are a highly effective technology for both indoor and outdoor unattended lighting application. It finds a wide range of application areas. Here are a few.
#TempleIllumination #ChurchIllumination #ChapelIllumination #FestivalLighting #GateLighting #CompoundLighting #GardenLighting #HotelLawns #PathwayLighting #PorchLighting #ParkingAreaLighting #StaircaseLighting #StreetLights #WarehouseLighting #GarageLighting #GodownLighting #ClosedApartmentLighting #GlowSignBoard #SurveillanceLighting
Installations
Features
- Made in India, a high quality indigenously designed & developed circuit
- Powers up to 350W load of lighting with overload protection fuse.
- Guaranteed long lasting with excellent insulation properties.
- Quality product with a one year warranty.
- Enhanced water and moisture resistant epoxy potted circuit.
- Easy installation or integration into existing lighting solution
Specification
TWYLYT Night Fall Activated Switch works around an indigenously developed circuit made from the best quality components tested for time.
The entire circuit is housed in a tough talc filled Polypropylene enclosure, possessing tremendous environmental stress crack resistance (ESCR) and excellent insulation properties which guarantees a long life.
Adding to this, the epoxy potting of the entire circuit enhances water and moisture resistance.
The TWYLYT Night Fall Activated Switch comes with 3 variations of sensors depending on its application.
The General Purpose Sensor can be fitted into any existing LED light fitments and lamps, by drilling an 8mm hole, in the external body of the light fixture, to expose the sensor. Typical applications would include external wall and ceiling lampshades and fitments.
The Single Module Plate Fitted Sensor allows the module to be housed in the Single module surface box or weather proof box, with the sensor plate fitted in the single module slot. Typical applications would include gate, Garden, garage and Porch lighting.
The Outdoor Weather Resistant Sensor comes with an anodised bracket & stainless steel fasteners and allows installations below chajjas, or below tiled roofs or just wall surfaces. In this case the TWYLYT module can be housed in the electrical gang box itself, and the sensor wires extended, by using 0.75 mm2 copper wires. Typical applications would include indoor spaces with less access to direct daylight.
#NightFallActivatedSocket
TWYLYT easy
TWYLYT easy is a simple DIY adaptation of the system, which simply fits between the existing LED lamp and socket. It can be introduced in any plain bulb socket fitted in verandas, porches, garages etc.
Design wise it is housed in an Acrylo-Butadyne-Styrene (ABS) plastic enclosure with a male and female bulb fitting to ensure easy installation into an existing bulb socket. This can power an LED bulb upto 150 watts.